enLanguage

Activated Carbon Treatment Of Oily Wastewater

May 19, 2023 Leave a message

The adsorption method for oil-water separation utilizes lipophilic materials to adsorb dissolved oil and other organic compounds in wastewater. Activated carbon is the most commonly used material, capable of adsorbing dispersed, emulsified, and dissolved oil in wastewater. However, due to its limited capacity (usually 30-80mg/g), high cost, and difficulty in regeneration, activated carbon is typically only used as the final stage of multi-stage treatment for oily wastewater. Effluent oil content can be reduced to 0.1-0.2mg/L. Activated carbon is mainly utilized for removing trace pollutants in wastewater treatment to achieve deep purification, requiring high water pre-treatment standards and a higher price point. In advanced treatment processes for refinery oily wastewater, it follows oil separation, air flotation, biological treatment, and sand filtration. This results in decreased phenol content from 0.1 mg/L (after biological treatment) to 0.005mg/L; cyanide content decreases from 0.19mg/L to 0.048mg/L; and COD decreases from 85mg/L to 18mg/L after activated carbon filtration.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry